DISBON DisboFLOOR 462 2K-EP Primer 25kg

DISBON DisboFLOOR 462 2K-EP Primer 25 kg – Primer and Mortar Resin

DisboFLOOR 462 is a transparent, solvent-free, and low-viscosity 2K epoxy resin for primers and scratch coats under floor coatings. When mixed with filler, it becomes a binder for highly wear-resistant industrial floorings, coving, and for reprofiling damaged areas.

Thanks to its high penetration capacity, the resin penetrates deep into the substrate. It is float-finishable, mechanically high-strength, and tested for resistance against moisture from behind. (Former designation: DisboXID 462)

Advantages

• Low viscosity (approx. 500 mPas) with high penetration capacity
• Solvent-free
• Float-finishable – also for mortar floors
• Mechanically high-strength, good chemical resistance
• Tested for resistance against moisture from behind
• Can be adjusted for rapid curing with DisboADD 903 accelerator
• Low-emission: AgBB-tested

Fields of application

• Primer under epoxy and PU floor coatings
• Scratch coat
• Binder for highly wear-resistant industrial mortar floors
• Coving and reprofiling of damaged areas

Technical data

• Material basis: low-viscosity 2K epoxy liquid resin, solvent-free
• Color: yellowish-transparent
• Container size: 25 kg
• Density: approx. 1.1 g/cm³
• Viscosity: approx. 500 mPas
• Shore hardness: approx. D 83
• Compressive strength (7 days, 23 °C): binder approx. 70 N/mm², mortar approx. 95 N/mm²
• Flexural strength (7 days, 23 °C): binder approx. 75 N/mm², mortar approx. 30 N/mm²
• VOC content: < 140 g/l
• Storage: cool, dry, frost-free, min. 1 year; if cold, store at approx. 20 °C before application

System components

• Fillers 0.1–0.3 mm, 0.3–0.8 mm, and 0.7–1.2 mm or filler 462
• DisboADD 903 accelerator for EP resins

Application

The substrate of concrete or cement screed must be load-bearing, solid, dry, and free of dust, oil, and grease, and must be mechanically prepared (e.g., shot-blasting or diamond grinding). Mix the components intensively using a slow-running agitator, transfer to another container, and mix again. Apply the resin to fill pores and recoat within the specified waiting time or broadcast with sand while fresh.

Suitable coating: DISBON DisboFLOOR 475 SL. Further primers: DisboFLOOR 460 and DisboFLOOR 461.

Note: All figures are approximate values. Please refer to the current Technical Information from DISBON for consumption rates, mixing ratios, and waiting times. For professional use only.