MAPEI Mapelux Opaca matte floor wax 10kg

MAPEI Mapelux Opaca 10 kg – matte metal wax for the maintenance of Mapefloor and Ultratop floors

Mapelux Opaca is a matte, ready-to-use metal wax for the protection and maintenance of MAPEFLOOR system floor coatings and ULTRATOP floors. It forms a durable protective film that shields the surface from wear and dirt while facilitating cleaning.

If you prefer a glossy surface, you can find the counterpart in MAPEI Mapelux Lucida.

Scope of delivery: 10 kg container, ready to use.

Advantages of Mapelux Opaca

• Matte, uniform appearance
• Protects against abrasion and dirt
• Simplifies routine cleaning
• Ready to use – no mixing required
• Highly efficient (approx. 50 g/m² per coat)

Typical areas of application

• Maintenance of Mapefloor floor coatings
• Maintenance of Ultratop design floors
• Indoor living areas, retail spaces, offices, and showrooms

Technical data

• Appearance: matte
• Consumption: approx. 50 g/m² per coat
• Recommended application: 2 coats, crosswise
• Application on Mapefloor: at the earliest after 24 hours
• Application temperature: +10 °C to +30 °C

Consumption

Consumption is approx. 50 g/m² per coat. With 2 coats (approx. 100 g/m²), a 10 kg container covers approx. 100 m².

Application of Mapelux Opaca

1. Prepare the floor

The floor must be clean, dry, and free of dust and grease. On new Mapefloor coatings, wait at least 24 hours for curing.

2. Apply the first coat

Apply Mapelux Opaca thinly and evenly using a mop or wax applicator (approx. 50 g/m²).

3. Apply the second coat

After the first coat has dried, apply the second coat crosswise to the first.

Note: All information is taken from the technical data sheet of the manufacturer MAPEI. Please observe the current product and safety data sheet before processing, which can be downloaded at the bottom of this page.