DISBOXID 460 2K-EP-PRIMER 25kg

Binder base / active ingredients

Low-viscosity 2K epoxy resin, totally solid according to German construction chemistry.

Purpose of use

As a primer and scratch coat on mineral substrates under floor coatings, also in the Disbon parking garage system OS 8.

As a binder for DisboADD 946 quartz sand mixture for the production of coves and for reprofiling excavated areas.

Note: Not suitable as a top coat.

Characteristics

• Good curing (even at 10° C)
• Weatherproof
• Permanently wet-resistant
• Tested against rear moisture exposure over 250 days
• Good chemical resistance
• Meets the requirements of DIN EN 1504-2 and DIN V 18026: Surface protection systems for concrete

shade

Transparent

Technical data

• Dry film thickness: approx. 95 µm/100 g/m²
• Pendulum hardness according to König: approx. 150 seconds
• Shore hardness (A/D): approx. D 78
• Compressive strength: Binder approx. 58 N/mm²
• Mortar 1:10 approx. 52 N/mm²
• Viscosity: approx. 700 mPas
• Flexural strength: Binder approx. 75 N/mm²
• Mortar 1:10 approx. 18 N/mm²

Appraise

Current information on request.

Packaging / Container sizes

25 kg container (mass 17.5 kg hobbock, hardener 7.5 kg bucket)

storage

Cool, dry, frost-free.

In its original sealed container, it has a shelf life of at least 1 year. At lower temperatures, store the material at approximately 20°C before processing.

Quality assurance

High-quality products require strict controls on raw materials and their processing. In-house chemists ensure this quality from the goods' incoming goods to their outgoing goods. Avenarius Agro produces according to the TÜV-tested and certified ISO 9001-2015 quality management system and has been awarded the Responsible Care certificate.

Manufacturer information
Safety data sheet