MAPEI Ultraplan O10 Self-Levelling Compound 1-10mm 25kg

MAPEI Ultraplan O10 25 kg – self-levelling, fast-hardening floor smoothing compound 1–10 mm

Ultraplan O10 is a very low-emission, self-levelling and hydraulically fast-hardening floor smoothing compound for layer thicknesses from 1 to 10 mm. It can be applied with a rake or pump and is ready for floor coverings such as ceramic, natural stone, resilient floorings and wooden floors after approx. 12 hours (at 3 mm).

Scope of delivery: 25 kg bag, individually or as a pallet with 40 bags.

Advantages of Ultraplan O10

• Self-levelling – level, smooth surface
• Layer thickness 1 to 10 mm
• Walkable after approx. 3 hours
• Ready for covering after approx. 12 hours (at 3 mm)
• Can be applied with a rake or pump
• Very low emission

Typical areas of application

• Levelling of screed and concrete floors before laying floor coverings
• Substrate for ceramic, natural stone, resilient floorings and wooden floors

Technical data

• Mixing water: approx. 6.5 l per 25 kg bag
• Layer thickness: 1 to 10 mm
• Pot life: 20–30 minutes
• Walkable: after approx. 3 hours
• Ready for covering: after approx. 12 hours at 3 mm layer thickness
• Storage: 12 months in unopened original packaging, in a cool and dry place

Consumption

The consumption is approx. 1.6 kg/m² per mm of layer thickness. For 3 mm, you therefore require approx. 4.8 kg/m² – a 25 kg bag is sufficient for approx. 5 m².

Application of Ultraplan O10

1. Prepare the substrate

The substrate must be load-bearing, clean and free of dust, loose particles, oil and grease. Prime absorbent substrates, e.g. with MAPEI Primer G or Eco Prim T Plus.

2. Mixing

Pour approx. 6.5 l of water into a container and mix the contents of the bag with a slow-speed mixer in a mixing bucket until lump-free.

3. Pouring and spreading

Pour the compound out and spread it or pump it within 20–30 minutes using a trowel or rake. Afterwards, use a spiked roller to finish.

4. Covering

Walkable after approx. 3 hours, ready for covering after approx. 12 hours (at 3 mm).

For orders of a full pallet of MAPEI Ultraplan O10 or more, we offer free shipping within Austria for single-variety orders.

Note: All information is based on the manufacturer's data from MAPEI. Please observe the current product and safety data sheets before application, which you can download at the bottom of this page.