SIKA Sikafloor-151 Epoxy Primer 30kg
SIKA Sikafloor-151 Epoxy Primer 30kg
Couldn't load pickup availability
SIKA Sikafloor-151 30 kg – 2-Component Epoxy Resin for Priming, Leveling & Epoxy Mortar
Sikafloor-151 is a low-odor, 2-component epoxy resin binder with quartz flour filler. It serves as the universal base for Sikafloor flooring systems: as a primer, bonding agent, leveling compound, scratch coat, as well as a binder for leveling and epoxy resin screed mortars.
Thanks to its low-viscosity consistency, Sikafloor-151 penetrates well into the substrate and ensures high adhesive strength. It is suitable for substrates with increased residual moisture and is tested for rising moisture – both indoors and outdoors.
Scope of delivery: 30 kg container (Component A 25.5 kg + Component B 4.5 kg).
Advantages of Sikafloor-151
- Universal: Priming, leveling, scratch coat, bonding agent, and mortar
- Low-odor
- Low-viscosity with good penetration
- High adhesive strength (> 1.5 N/mm², concrete failure)
- Mechanically high-strength
- Suitable for increased residual moisture up to 6 CM-%
- For indoor and outdoor use
- CE-marked according to EN 1504-2 and EN 13813
Typical Areas of Application
- Primer for concrete, cement screed, and epoxy mortar (normal to highly absorbent)
- Primer and leveling under Sikafloor epoxy and PU coatings
- Scratch coating and leveling of rough surfaces
- Binder for epoxy resin repair and screed mortars
- Garages, workshops, warehouse, and industrial floors
Technical Data
- Mixing ratio: A : B = 85 : 15 (parts by weight)
- Density: approx. 1.47 kg/l (mixed)
- Shore D Hardness: approx. 75
- Substrate moisture: ≤ 4 CM-%, for pore-free application (≥ 0.5 kg/m²) up to 6 CM-%; anhydrite ≤ 0.3 CM-%
- Application temperature: +10 °C to +30 °C (air and substrate), max. 80 % rel. humidity
- Pot life: approx. 50 min at +10 °C, approx. 25 min at +20 °C, approx. 15 min at +30 °C
- Overcoatable: at +20 °C after 12 h to 2 days (solvent-free subsequent layer)
- Shelf life: min. 2 years, store dry, cool, and frost-free
Consumption
- Priming: 1–2 × 0.35–0.55 kg/m²
- Leveling (roughness depth < 1 mm): 1 part resin + 0.5 parts quartz sand 0.1–0.3 mm, approx. 1.7 kg/m² per mm
- Leveling (roughness depth up to 2 mm): 1 part resin + 1 part quartz sand 0.1–0.3 mm, approx. 1.9 kg/m² per mm
- Epoxy and repair mortar (15–20 mm): 1 part resin + 8 parts quartz sand, approx. 2.2 kg/m² per mm
A 30 kg container is sufficient as a primer at approx. 0.45 kg/m² for around 65 m².
Application of Sikafloor-151
1. Preparing the Substrate
The substrate requires a compressive strength of at least 25 N/mm² and an adhesive tensile strength of at least 1.5 N/mm². It must be level, solid, dry, and free of oil, grease, and loose particles. Mechanically remove cement laitance and contaminants, e.g., by shot blasting or grinding.
2. Mixing
Stir component A, add component B, and mix at max. 300 rpm. For leveling compounds and mortar mixtures, add the quartz sand after approx. 2 minutes and continue mixing for at least 3 minutes. Decant into a clean container and mix briefly again.
3. Priming
Apply the primer twice, preferably with a rubber squeegee, and then roll over with a short-pile roller in a crosswise pattern. In case of rising moisture, apply at least 2 × 300 g/m².
4. Leveling (optional)
Distribute the leveling compound over the primed surface using a rubber squeegee, trowel, or doctor blade. If bubbles form, mix in 5–8 % Sika Stellmittel T.
5. Subsequent Coating
Proceed with the desired floor coating within the waiting period (at +20 °C after 12 h to 2 days), e.g., Sikafloor-2600 or Sikafloor-264 Plus. Protect fresh material from condensation for at least 24 hours.
Note: All technical data is taken from the current Sika product data sheet. Please observe the product and safety data sheets, which you can download at the bottom of this page, before application.
Manufacturer's specifications
Manufacturer's specifications

Alles gut
Die Produkte von Sika haben einen guten Ruf.
Lieferung schnell, alles da
FAQ
How long does shipping take?
Your order will typically be shipped within three to five business days. In rare cases, however, there may be slight delays. If this happens, our service team will inform you immediately!
How much are the shipping costs?
A detailed overview of shipping costs can be found HERE . These are calculated at checkout and vary depending on the product, weight, and delivery address.
Can I pick up my order myself?
Yes, you can select the "Collection" delivery option at checkout. We will inform you by email as soon as your order is in stock and ready for collection. Our regular collection times are Monday to Friday from 2 pm to 4 pm .
Can I also get specific advice on a product?
Yes, of course! Feel free to contact our in-house expert HERE !
Can I register as a business customer?
Yes! As a business customer, you can request special access HERE via our registration form . With this access, you'll benefit from net prices , attractive discounts on selected product groups , and individual pricing for bulk orders.
Get great deals & news with our newsletter!
By subscribing to the newsletter, you agree that we may process your information in accordance with our privacy policy .