Skip to product information
1 of 2

SIKA Sikafloor-264 Plus Epoxy Floor Coating 30kg

SIKA Sikafloor-264 Plus Epoxy Floor Coating 30kg

Regular price 339,99€
Regular price Sale price 339,99€
Unit price 11,33€/kg
Sale Sold out
Taxes included. Shipping calculated at checkout.
Color: RAL7001 (silbergrau)
EMPTY DOM REMOVE PROTECTOR
Quantity
EMPTY DOM REMOVE PROTECTOR

SIKA Sikafloor-264 Plus 30 kg – 2K Epoxy Resin Floor Coating for Industry & Trade

Sikafloor-264 Plus is a solvent-free, 2-component epoxy resin floor coating with 100% solids content. It creates a wear-resistant, seamless, and easy-to-clean surface – optionally smooth and glossy or slip-resistant.

This versatile resin is used as a roller and self-levelling coating, as a mortar screed, and as a topcoat and sealer for broadcast, anti-slip systems. It is suitable for indoor concrete and cementitious screeds subject to medium mechanical loads.

Scope of delivery: 30 kg container (Component A 24 kg + Component B 6 kg). Available from us in 20 RAL colors; additional shades available upon request.

Advantages of Sikafloor-264 Plus

  • Solvent-free, 100% solids
  • Good mechanical and impact resistance
  • Seamless, hygienic, and easy-to-clean surface
  • Can be applied as smooth/glossy or slip-resistant (R9 to R12 according to DIN 16165)
  • High compressive strength (approx. 140 MPa) and flexural strength (approx. 45 MPa)
  • Fire behavior Bfl-s1 according to EN 13501-1
  • Suitable for cleanrooms (ISO 14644-1, Class 5), radon-tight, tested for indirect food contact
  • CE marked according to EN 1504-2 and EN 13813

Typical Fields of Application

  • Warehouses and workshops
  • Production and assembly areas
  • Workshops and garages
  • Food and beverage facilities (indirect contact)
  • Cleanrooms and technical rooms
  • Sealing of broadcast, anti-slip floorings

Sikafloor-264 Plus is intended for indoor use.

Technical Data

  • Mixing ratio: A : B = 80 : 20 (parts by weight)
  • Density: approx. 1.48 kg/l (mixed)
  • Shore D hardness: approx. 80
  • Abrasion resistance: approx. 430 mg (Taber, EN ISO 5470-1)
  • Bond strength: > 1.5 N/mm² (concrete failure)
  • Application temperature: +10 °C to +30 °C (air and substrate), max. 80% relative humidity
  • Pot life: approx. 50 min at +10 °C, approx. 25 min at +20 °C, approx. 15 min at +30 °C
  • Walkable: after approx. 24 h, light traffic after approx. 4 days, fully loadable after approx. 5 days (at +20 °C)
  • Shelf life: 24 months; store in a dry, cool, and frost-free environment

Consumption & System Build-up

  • Thin coating (approx. 0.6–0.8 mm): Primer 0.35–0.55 kg/m² + 1–2 layers of Sikafloor-264 Plus with 0.25–0.30 kg/m² each
  • Mortar coating (approx. 1.5–3 mm): 1 part by weight of Sikafloor-264 Plus + 0.7 parts by weight of quartz sand 0.1–0.3 mm, approx. 1.7 kg/m² per mm of layer thickness
  • Sealing of broadcast floorings: approx. 0.60–0.80 kg/m²

As a thin coating applied in two layers, a 30 kg container covers approx. 50–60 m². The actual consumption depends on the roughness and absorbency of the substrate.

Application of Sikafloor-264 Plus

1. Prepare the substrate

The substrate must be level, solid, dry, and free of oil, grease, and loose particles. Cement laitance must be removed mechanically, e.g., by shot blasting or diamond grinding, until a rough, open-pored surface is obtained. Do not apply on surfaces with rising moisture.

2. Priming

Prime the prepared substrate pore-free with Sikafloor-150 Plus or Sikafloor-151. Level rough surfaces beforehand with a scratch coat made of primer resin and quartz sand.

3. Mixing

Stir component A, add component B, and mix homogeneously for at least 3 minutes at a maximum of 300 rpm, e.g., in a mixing bucket. Then decant into a clean container and mix again briefly.

4. Coating

For thin coatings, apply both layers crosswise using a short-pile sealing roller. For self-levelling and mortar coatings, spread the material with a toothed squeegee and immediately deaerate in crosswise strokes using a spiked roller. Use spiked shoes to walk on the fresh surface.

5. Optional: anti-slip application

For a slip-resistant surface, broadcast the fresh layer with quartz sand and seal with Sikafloor-264 Plus after curing (approx. 0.6–0.8 kg/m²).

6. Allow to cure

The minimum temperature of +10 °C must not be fallen below even during the curing process. Protect freshly coated surfaces from moisture and condensation for at least 24 hours.

Note: All technical specifications are based on the current Sika product data sheet. The RAL colors shown are for orientation purposes; direct sunlight can lead to color changes in epoxy resins. Please consult the product and safety data sheets, which can be downloaded at the bottom of this page, before application.

Manufacturer's specifications

RAL colors

View full details

FAQ

How long does shipping take?

Your order will typically be shipped within three to five business days. In rare cases, however, there may be slight delays. If this happens, our service team will inform you immediately!

How much are the shipping costs?

A detailed overview of shipping costs can be found HERE . These are calculated at checkout and vary depending on the product, weight, and delivery address.

Can I pick up my order myself?

Yes, you can select the "Collection" delivery option at checkout. We will inform you by email as soon as your order is in stock and ready for collection. Our regular collection times are Monday to Friday from 2 pm to 4 pm .

Can I also get specific advice on a product?

Yes, of course! Feel free to contact our in-house expert HERE !

Can I register as a business customer?

Yes! As a business customer, you can request special access HERE via our registration form . With this access, you'll benefit from net prices , attractive discounts on selected product groups , and individual pricing for bulk orders.